Polarising Circuit
The Polarising Circuit is a simple, low cost, battery-operated unit that supplies the polarising voltage for a single electrode and produces an analogue output for a chart recorder.
The controls allow the polarising voltage (which is displayed on a meter) to be adjusted. The recorder output voltage is adjusted by a five position, coarse adjustment switch and a ten-turn fine potentiometer which enables the electrode to be calibrated to the recorder. The electrode and the recorder are connected via DIN sockets on the front panel. A stirrer is not included.
Specifications
A comparison chart for our range of controllers is also available.
| Meter Type | Not included |
|---|---|
| Meter Resolution | Not applicable |
| Polarising Voltage | 0–1.5 V |
| Electrode Sockets | 1 × DIN |
| Output Sockets | 1 × DIN (0–30 mV) |
| Stirring | Not included |
| Power Supply | 1 × C type battery (supplied) |
| Size | 200 mm (width) × 120 mm (depth) × 70 mm (height) |
| Weight | 0.8 kg |
Rank Brothers Ltd reserves the right to change specifications in the light of continuing development.
Operating Manuals
These operating manuals are in PDF format. They can be opened in the free Adobe Acrobat Reader software.
Ordering Information
For a working oxygen measurement system you will need a controller and an electrode (the Polarising Circuit also requires a separate stirrer). Rank Brothers offers a range of Perspex oxygen electrodes and glass oxygen electrodes suitable for use with this controller.
To request a quote please use the Contact Us page (or email us) and reference the order codes of the items you require.
Controller
| Order Code | Description |
|---|---|
| OXY031A | Polarising Circuit (stirrer not included) |