Digital Model 10
The Digital Model 10 is designed as an integrated unit to make oxygen measurements. The standard version includes an electronic magnetic stirrer and the electronics to supply the polarising voltage, signal amplification, and digital display of percentage saturation for a single electrode. The only additional requirement is a supply of constant temperature water to the incubation chamber to ensure accurate readings.
Located on the front panel are controls to:
- operate and adjust the stirring speed;
- set the polarising voltage between 0–1 V;
- zero the electronics and electrode output; and
- calibrate the electrode.
At the rear a socket provides a 0–1 V output suitable for a data logger, chart recorder, or other device.
|Polarising Voltage||0–1 V|
|Recorder Output||0–1 V via BNC (suitable for data logger or chart recorder)|
|Stirrer||120 to 1200 rpm|
|Power Supply||AC 110–120 V and AC 220–240 V versions available (power cord supplied)|
|Size||230 mm (width) × 300 mm (depth) × 200 mm (height)|
|Weight||2.5 kg (excluding electrode)|
Rank Brothers Ltd reserves the right to change specifications in the light of continuing development.
These operating manuals are in PDF format. They can be opened in the free Adobe Acrobat Reader software.
For a working oxygen measurement system you will need a controller and an electrode. Rank Brothers offers a range of Perspex oxygen electrodes and glass oxygen electrodes suitable for use with this controller.
|OXY018A||Digital Model 10 (110/120 V)|
|OXY020A||Digital Model 10 (220/240 V)|
|OXY036P||PicoLog 1216 data logger (8 channels, 12-bit resolution, USB connection)|
|OXY037B||Connecting lead (Digital Model 10 to PicoLog 1216)|
|OXY036Z||Pico ADC-20 data logger (8 channels, 20-bit resolution, USB connection)|
|OXY037A||Connecting lead (Digital Model 10 to Pico ADC-20)|